Welcome to visit Hunan Wodon New Material Co., Ltd
Telephone：+86 13151852588 EN/CN
| Application | Model | Diameter[mm] | Hardness[HRC] | Main Ingredient |
| High manganese steel hardfacing wire, Suitable for hardfacing hammer head, hammer plate and other high impact parts | D114 | 1.6 | 50-55 | C, Cr, Mn |
| Suitable for hardfacing bucket gear, mining machinery and other wear parts | D172 | 1.2, 1.6 | ≥40 | C, Cr, Mo |
| Suitable for hardfacing the surface of wear parts, such as gear, digger. mining machinery and etc. | D212 | 1.2, 1.6 | ≥45 | C, Cr, Mo |
| Suitable for hardfacing high manganese rail, bulldozer and other wear parts under impact. | D256 | 1.6 | HB≥170 | C, Mn |
| Suitable for hardfacing continuous casting roll | D313 | 1.6 | 45-50 | C, Cr |
| Suitable for repairing die and toughening tool, and mechanical parts with high wear performance | D322 | 1.6 | 55-63 | C, W, Mo |
| Suitable for hardfacing hot rolling roll | D405 | 1.6 | 53-60 | C, Cr, Mo, W, V |
| Suitable for hardfacing general corrosion resistant parts | D430 | 1.6 | 35-40 | C, Cr |
| Suitable for hardfacing valve | D502Mo | 1.6 | 35-45 | C, Cr, Mo |
| Suitable for hardfacing continuous casting roll | D518 | 1.6 | 40-50 | C, Cr, Mo, Ni |
| Suitable for hardfacing heavy wear parts, multi-layer welding up to 50 mm | D688 | 1.2, 1.6 | 50-58 | C, Cr |
| Suitable for hardfacing heavy wear parts, multi-layer welding up to 20 mm | D788 | 1.2, 1.6 | 50-60 | C, Cr |
| Suitable for hardfacing heavy wear part, single layer welding only | D788A | 1.2, 1.6 | 50-60 | C, Cr |
| Suitable for hardfacing heavy wear parts, multi-layer welding up to 10 mm | D888 | 1.2, 1.6 | 58-65 | C, Cr |
| Suitable for hardfacing heat resistant wear parts | D995 | 1.6 | 58-65 | C, Cr, Nb, W, V |
